Відео

Nice project. But I've tried setups like this, and the problem is that the sliding table is just too far from the blade. I've thought about making the sliding table extend over and on top of the original saw table, but then you lose maximum depth of cut. At the end of the day, I think a euro style slider is still the best option. But as those are expensive, making do with something like this may be necessary.

What material is the black board made of?

It's hard to understand 🙄

You sure there wasn't a creepier music to use for this video?

çok güzel bir ürün yapmışsınız, fakat ortaya çıkan ürünü neredeyse hiç göremiyoruz, sadece birkaç kesit görebildim, tam detayları ile ortaya çıkan ürünü tanıtırsanız daha güzel olur, video boyunca sadece ürünün yapılış videosunu izledim, elinize sağlık teşekkürler, iyi iş çıkardınız

Would be nice if you said where you are making those arcs from and for which pattern they create and what the angels are. You go too fast to decipher your movements. You are very skilled at math and angels, some of us are not. Me, for example.

Hi, love the video, the circular piece you put in at 0:55, what is that called and what are the dimensions? thank you

Perfect plan, do, check, action. Awesome job. Thanks for share visual knowledge.

Very nice build.Where did you get the round rails in the mounts that slide on them?

Как называется этот синий материал?

Not a home made one. Normally home have not this kind of machines

Why is it that everyone jumps into the macro lens view of the build montage without showing you their cool project and why its cool?

Love it, love it, love it. Thank you.

Really good video, thanks! I’d be interested to know if the timber you used inside the fence expands or contracts enough to make the fence out of square in time

6:20

Good job 👍 What is the diameter of the rail?

I could watch this all day. So satisfying when everything is so seamless and all goes together just PERFECT!! I’m sure everyone will agree that’s a good day in the shop 😃

Mantap keren👍

Cool Idea Bruh

Thank you for share. In need a fence.

i want to believe that you made this video for your lil children. The music tho

0:10 do you have plans

one of the best video for these table slide upgrade!

terrific project. BUT, do you really want the ER docs to know you by name? Look what you did at 0:15 and again at 0:18. You are cutting a very long workpiece with insufficient support allowing it to rise off the table. This is asking for a kickback. Ask me how I know and how many stitches I took.

Could you talk while the video is playing

Hate these videos with no narration or talk over. Presenter, you need to watch some of the good videos and improve your presentation.

you do it to fast do it slower are send me how to do this if you would thanks david

멋진 작품이내요

MDF board ??

Music is annoying.

Nice

I think you need to take care of the dust collection. At least wearing mask is a good idea.

90

Quedo perfecto, pero le cambiaría ese metro de costurero por una de metal, con el tiempo se borrarian los números 👍

Do you have my dimensions so I can make this jig please

Гайки, которые заколачиваются (с шипами) - их не нужно фиксировать дополнительными саморезами. В них винты (ручка ч резьбой) закручиваются с ДРУГОЙ стороны доски!

well done!

Is that HMR material you are working with? I cannot find a supplier in Texas, USA for HMR

The video is great but the music is very annoying.

ดีมากชังไม้

What are the equipment?...😊😊😊😊

It is nice.

Initial setup was quite easy ua-cam.com/users/postUgkxXh-4_3-ZT1fFWP91ZV7iVqzElr0lEb-a Did have to adjust the fence to blade readout-was off by .003". Blade angle was off by 4 degrees. All easy adjustments. Would recommend.

You do have to spend some time setting the saw up... blade, fence, etc. But once done, the saw is great. Fairly compact which is Nice ua-cam.com/users/postUgkxXh-4_3-ZT1fFWP91ZV7iVqzElr0lEb-a I did get an Incra Miter Gauge which takes some setup as well. The stock miter gauge can be adjusted in the miter slot with a little painter's tape... this tightens up the side to side play a lot.

You do have to spend some time setting the saw up... blade, fence, etc. But once done, the saw is great. Fairly compact which is Nice ua-cam.com/users/postUgkxXh-4_3-ZT1fFWP91ZV7iVqzElr0lEb-a I did get an Incra Miter Gauge which takes some setup as well. The stock miter gauge can be adjusted in the miter slot with a little painter's tape... this tightens up the side to side play a lot.

Can I please have a link to buy the aluminum adapters?

Que trabalho caprichoso e a perfeição meus parabéns continue nos apreciando com o seu trabalho ótimo obrigado

Could somebody please explain the blue MDF? I thought I heard somebody say it was just a Food Dye or Colourant?? Is there any truth to this claim or am I way off. I don't know what to call it and therefore don't know what to ask for when I go into the place to buy sheet goods.. I Love the look of this so much I had to come back and say some more about it. I have that same Mitre Gauge but I want to make a longer fence for it or maybe get a nice piece of Aluminium. It's expensive now but we will see what it is soon enough, price wise.. LOL It all comes down to cost nowadays anyway. Look after the pennies and the pounds take care of themselves.. I love the look of the blue on the table top. It makes ur saw pop my bro. Again I want to thank u for this video. It is helping me out so much with measuring the Block holes for the MDF top. I might change to that plywood with the brown coloured film, Phelonic?? I might be wrong with the spelling of that.. LMAO. Keep up the great work pal. Take it easy there.. Salute!!! ✌

Hey there my bro.. Love this sliding table u built. I bought 800mm length linear rails like u have here. I'm going to completely rebuild my table saw and I'm thinking of putting the sliding table on the side as Part of the overall design. I'm just drawing the thing a A4 sized sheets. I don't have anything else atm. It'll be grand. I cannot wait to get building soon. I'm going to have to put Castors on the saw even though I'd rather not for the stability side of things. When there are castors on something it means u struggle to keep the saw steady on the floor. I'm looking at another way of keeping the castors but that's going to have to wait a bit. U have built some great projects on ur channel bro. I enjoy watching ur videos. I will be looking at some more of ur videos this week to see if I can get a coupe of great ideas from u.. Thanks my friend..

Bahan baku warna biru ,mohon infonya